 |
 |
|  |
 |
 |
 |
|
Lube-Shuttle® AccuLuber
14.4-LS |
|

|
Part No

|
Robust Electric
14.4V Battery Operated Grease Gun for
Lube-Shuttle® - System-Cartridges.
Simply remove the cartridge closure, insert
into the zinc plated
steel body,screw in and you are ready to go!
A powerful DC motor drive, with planetary gearbox
and reciprocating piston gives up to 400 bar
of grease pressure.
Maximum pressure is limited by an inbuilt relief
valve.
Description: Battery Operated Grease Gun, 14.4V
Ni-Cad battery, 1,500mAh, Delivery: 100cc per
min. approx., electronically controlled fast
charger with overload protection ( 1 hour charge
time), High Pressure Rubber Hose 750mm ( burst
pressure 1,650 bar) with 4 jaw Hydraulic Coupler
R1/8" in Plastic Carry Case with space
for Spare Battery and Cartridge.
|
| 34 258 07 |
Electric Grease Gun Kit
AccuLuber 14.4-LS |
|
Spare
Battery for AccuLuber 14.4-S + LS |
|

|
Part No
 |
High Power
Ni-Cad Battery 14.4V DC, 1,500mAh, with Overload
Protection. Charging Time: 1 hour approx.
|
34
259 06 |
Spare Battery
for AccuLuber 14.4-LS |
|
Charger
230V for Acculuber 14.4-S + LS |
|

|
Part No
 |
Battery Charger
with Overload Protection 230V 50 Hz / 14.4
DC, 1,500 mA, ON/OFF LED-Monitoring Lamp,
1hour Fast Charge Function,
2m Cable
|
34
259 20
34 259 68 |
Charger 230V for Acculuber
14.4-S + LS
Charger 12V - 24V for Acculuber 14.4-S + LS |
|
High
Pressure Rubber Hose |
|

|
Part No
 |
for AccuLuber
14.4-LS
High Pressure Rubber Safety Hose ø 13mm,
Hexagonal End Fittings for positive and safe
assembly , Burst Pressure 1,650 bar ( Double
Steel Wire Braided), either with or without
4 Jaw Hydraulic Coupler.
|
32
585 80
32 589 48 |
RH-75 750mm Thread R
1/8", without Coupler
RH-75C 750mm Thread R 1/8", with
Coupler |
|
Carry
Strap for Acculuber |
|

|
Part No
 |
Simple, fast
and secure strap ensuring ease of use of
the Battery Operated Grease Gun
|
34
259 99 |
Carrying Strap for Acculuber
14.4-S + LS |
|
Lube-Shuttle® Air
Operated Grease Gun DF-LS |
|

|
Part No
 |
One Hand Air
Operated Grease Gun for Lube-Shuttle® -
Cartridges designed for Grease up to NLGI
Class 3, Single Shot System, Output 1cc per
stroke, Pressure Ratio 1:60, Max Pressure
480 bar/ 6950 psi, Air Pressure 3 - 8 bar
|
30
371 09
30 373 07
|
DF-LS with rigid tube
E4024 R 1/8",
with Coupler
DF-LS with rubber hose RH-30C R 1/8",
with Coupler
|
|
Lube-Shuttle® Dispenser
Lube-Shot 400 |
|

|
Part No
 |
Universal
Grease Dispenser for Lube-Shuttle® -
System-Cartridges
Designed to apply grease to all open surfaces,
such as uncaged roller bearings. The Dispenser
will replace traditional, messy methods of
application with open cartridges and brushes.
The use of this Dispenser will permit clean
and uncontaminated greasing of open bearings.
Lube-Shot 400 with nozzle, screw cap and an
adaptor nozzle for the Lube-Shuttle® -
System-Cartridge.
|
| 30
001 10 |
Lube-Shuttle® Dispenser
Lube-Shot 400 |
|
Nozzle-Set
Lube-Shot 400 |
|

|
Part No
 |
Nozzle with
Closure Cap
for the Lube-Shuttle® - System-Cartridges
|
| 30
009 05 |
Nozzle-Set Lube-Shot
400 |
|
Mato Industries Ltd, Lumatic Lubrication Division. 26 Brunel Road, St Leonards on Sea. East Sussex
TN38 9RT
Tel: 01424 851270 Fax: 01424 850091 Email: sales@lumatic.co.uk www.lumatic.co.uk |
|
|
|
|
 |
|
| |
 |