Electric Gear Pump with 3 m. mains cable,
Protected on/off switch, Integral by-pass pressure regulator.
For engine, gearbox and hydraulic oils of low to medium viscosity
with a flash point higher than 55°C. Only for transfer, do not use with hose reels or for pumping over longer distances.

Motor: 0.37 KW
Thread: 3/4" (delivery) / R 1" (suction)
Max. Pressure: 8 bar (116 psi) approx., Suction head to 2.5m
Output ( free delivery). 25 l/min (SAE 30)
230V, 50 Hz, minimum 4.0 amp fuse required, IP 55

Pump without accessories, details as for EP300, but with
Pressure Switch providing automatic switch off of pump
when set pressure is reached i.e. when the oil control gun is closed.
When pressure falls i.e when oil control gun is opened, the pump is switched on.

Self priming gear pump with integral by-pass pressure regulator,
3 m mains cable, Steel suction tube with filter,
Suction hose 700 mm long 2" , 2" BSP Bung adaptor with elbow,
4 m delivery hose 3/4" with swivel nuts,
Oil control gun with non-drip nozzle for engine oil

Suitable for 200 litre drums or 700 and 1000 l Tanks.
For technical data see above.

As EP300-S but with Pressure Switch
(providing automatic switch off of pump
when set pressure is reached i.e. when the oil control gun is closed.
When pressure falls i.e. when oil control gun is opened,
the pump is switched on.)

Electric Gear Pump 12V, without Accessories, Integral Bypass
Pressure Regulator, for Motor, Gearbox and Hydraulic Oils of
low to medium viscosity. Suitable for fluids with a flash point
not higher than 55° C. Not for use with Hose Reels or for pumping
over long distances.
Output approx: 25 l/min (SAE 30 Free Delivery )
Max. Pressure: 5-6 bar, Suction Head to 2.5m
Technical Data: 12V DC 20-35 A, 0.40 KW, IP55

Threads: 3/4" Delivery, 1" Suction

Pump without accessories, details as for EP400, but with
Pressure Switch providing automatic switch off of pump
when set pressure is reached i.e. when the oil control gun is closed.
When pressure falls i.e when oil control gun is opened, the pump
is switched on

Electric Gear Pump System EP300F
Mobile version with Trolley, 4 m Delivery Hose 3/4",
Digimet E40 Hose End meter with Nozzle for engine oil
Technical Data see page 46 for EP 300

Pump System with Electronic Control. A combination of Pressure and Flow Monitoring provides optimum pump performance with increased reliability compared to pressure switch control alone. A smooth delivery of the oil and control of the pump with deliveries up to 25 lpm free flow at the pump outlet. 1" BSP Inlet, 3/4" BSP Outlet